Noticias

Super Promoção VU+ Zero só 120€ [www.Lmpcsatelite.com]

vu-zero.png
https://www.facebook.com/lmpcinformatica/likes

Façam a compra no seguinte link: »»»»»»LMPC SATÉLITE Gigablue SE Plus/UE Plus/QUAD Plus Medi@link Skybox Ferguson VU+ Solo2 Solo SE Duo2«««««« VU+ Zero só 120€ basta para isso meter o seguinte código VUZERO no cupão de desconto no site www.Lmpcsatelite.com

Opera browser

HbbTV

HDMI 1.4 connection

DVB-S2 tuner

External 12 V power supply

Technical highlights:

– 2K DMIPS processor

– DVB-S2 tuner

– 256MB Flash

– 512 MB of DDR3 DRAM

– 1 x Smartcard-Reader (Xcrypt)

– 2 x USB

– 10/100 MBit Ethernet interface

– 1 x HDMI 1.4 video / audio output (digital)

– 1 x RCA video output (analog)

– 2 x Audio Out (L / R) RCA (analog)

– Unlimited channel lists for TV / Radio

– EPG (electronic program guide) support

– Support of favorite lists (Bouquets)

– OSD in many languages and skin-support

– Extended with plugins

– Automatic / manual channel search

– DiSEqC 1.0 / 1.1 / 1.2, USALS

– External 12V power supply

– Power Button

VU + ZERO Specifications:

– DVB-S2 Tuner:

– Input frequency range 950 … 2150 MHz

– Input level range – 65 dBm …- 25 dBm

– Tuner input F socket

– Input impedance 75 ohms

– AFC capture range +/- 3.5 MHz

– Demodulation QPSK and 8PSK

– FEC Viterbi and Reed-Solomon

– Viterbiraten 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9

– Roll-off Factor 35%

Video decoding:

– Video Compression MPEG-2 / H.264 and MPEG-1 compatible

– Video Standard PAL G / 25 Hz, NTSC

– Aspect ratio 4: 3/16: 9

– Letterbox for 4: 3 TV-Device

Analog output:

– Output level L / R 0.5 Vpp into 600 ohms

– THD> 60 dB (1 kHz)

– Crosstalk <-65 dB

Video parameter:

– Input level CVBS 1 Vpp 00:25 +/- dB at 75 Ohm

Ethernet:

– 100/10 MBit compatible interface

USB:

– USB 2.0 port (2x)

LNB power supply DVB-S2 Tuner:

– LNB Current 400mA max. Short-circuit protected

– LNB Voltage horizontal without load 19,5V17,6V at 400mA

– LNB Voltage vertical without load 14.5V 11.8V at 400mA

– LNB is turned off in standby mode

Control of the satellite positions:

– DiSEqC 1.0 / 1.1 / 1.2 and USALS – Rotor Control

power consumption:

– <13W (in operation, with LNB)

– <12W (in operation, without LNB)

– <0.5W (Deep-Standby-Mode)

Input voltage:

– External power supply:

– Entrance:

– AC 110-240V / 50-60Hz / 1.0A

– Exit:

– 12V DC / 3.5A

General information:

– Ambient temperature + 15 ° C … + 35 ° C

– Humidity <80%

– Dimensions (W x D x H): 211 mm x 185 mm x 40 mm

Scope of delivery:

– Receiver (VU + ZERO)

– Remote control

– Batteries

– Cable for analog A / V outputs (3.5mm Jack)

– External IR sensor

– External power supply

– User Guide

Imagens Anexas

To Top